Large Minecraft Double Chest for A1 Mini

Designed for A1 Mini as a custom gift box for this amazing Ender Dragon model. Outside dimensions are 180 x 90 x 94 mm and the walls are 3 mm thick. The hinges are modeled to be robust and not to take up too much internal space. Assembly: Press-fit the latch into the lid. The latch is designed for good friction fit, but each filament can behave differently. If the fit is too loose, use a drop of glue to hold it in place. Put the lid hinges into the recesses on the top of the main chest body. Push a bit of filament (ideally same color as used for the chest) through the holes in the center of the hinges on both sides of the chest. Make sure that the filament goes through the entire hinge and the end passes through the hole on the inside of the chest. Pull the filament so it's flush with the wall on the inside of the chest and cut off the excess with flush cutters. This part was also designed for good friction fit, but if the filament is too loose, use a drop of glue for it to stay in pla