Slicer Discord
Large Scale Technic Wall Clock with optional Stand – Modèle 3D imprimable de MakerWorld MakerWorld
Decor

Large Scale Technic Wall Clock with optional Stand

par Pugwash · Decor
13 Téléchargements
18 Likes
2 Makes
Voir le modèle
Based on Building Brick Technic gears, but scaled to 750%. I've used a 24 tooth gear with 3 axle holes.The back plate of the clock includes a screw slot for wall-hanging. The optional rack and wedge allows you to place the clock on a flat horizontal surface. The clock will house a standard clock mechanism of 56x56mm and a thickness of about 16mm. The threaded shaft of the mechanism needs to protrude 13mm to keep the hands forward of the clock face. If your mechanism is more/less deep you might need to scale the centre support piece for the correct thickness.Push the threaded screw of the mechanism through the front axle and secure with the nut (that came with your mechanism).Push the front axle into the clock from behind until the mechanism is fully inserted.Place the centre support piece on the back of the clock - mind the orientation. Push fit the rear axel into the centre supportPush fit the rear plate over the rear axel - ensure screw holes line up with the clock front.Screw th
Catégorie
Decor
Source
MakerWorld
Publié
Mis à jour
Ce qu'il faut pour imprimer: Intermédiaire Confiance faible
Monobloc Visserie requise
Supports 1/3
Assemblage 0/3
Réglages 1/3
Taille du plateau 0/3
Post-traitement 1/3
Imprimante
FDM / FFF
Format de fichier
STL
Matériau
PLA, TPU
Plateau min.
56 mm (Petit)
Post-traitement
Visserie
Logiciel
Cura, PrusaSlicer ou similaire
Même créateur, plus de plateformes

Pugwash publie également sur

124 modèles supplémentaires sur 2 autres plateformes

Vérifié par correspondance des titres de modèles entre plateformes.
Pas encore d'évaluations
Pas encore de commentaires – soyez le premier !

Modèles similaires

6 Suggestions
Feed Blog Slicer Calculateur Recherche par image Soumettre Contact Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Ajouter à la collection