Slicer Discord
Large Water Bottle – Modèle 3D imprimable de MakerWorld MakerWorld
Sport & Outdoors

Large Water Bottle

148 Téléchargements
28 Likes
17 Makes
Voir le modèle
There's 2 different versions of the bottle (one with a loop and one without) and 2 different caps. I split the loop cap into 2 parts for easier printing and will need to be secured with epoxy. The gasket will need to be printed at a resolution of 0.12 or less as it's an extremely tight fit in the lower lip of the cap. The water bottle doesn't need supports but the 2 piece cap does. Dimensions are 246.75 x 102.6. Holds about 46.5oz of water. Notes: For best results, fill the edges of the bottom cap with epoxy and put the top cap on. Use a toothpick of something similar to fill in the gap between the top and bottom. You'll need to cut/grind away the inner seam on the bottle where the gasket comes into contact so the cap spins easier.
Catégorie
Sport & Outdoors
Source
MakerWorld
Publié
Mis à jour
Ce qu'il faut pour imprimer: Intermédiaire Confiance faible
Pourquoi ?
assemblage en 2 parties
Supports 1/3
Assemblage 1/3
Réglages 1/3
Taille du plateau 0/3
Post-traitement 1/3
Imprimante
FDM / FFF
Format de fichier
STL
Matériau
Post-traitement
Collage
Logiciel
Cura, PrusaSlicer ou similaire
Même créateur, plus de plateformes

SYST3M_OVERIDE publie également sur

58 modèles supplémentaires sur 2 autres plateformes

Vérifié par correspondance des titres de modèles entre plateformes.
Pas encore d'évaluations
Pas encore de commentaires – soyez le premier !

Modèles similaires

6 Suggestions
Feed Blog Slicer Calculateur Recherche par image Soumettre Contact Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Ajouter à la collection