Laser Cable Chain Upgrade

par AndresMF · Tools

446 Téléchargements

319 Likes

0 Makes

Voir le modèle

A. Laser engraver. Size: 45x60x16 cm. Engraving Area: 40X50 cm (maximum)
B. 20x20 cm aluminium extrusion profile
C. MDF Sheet 45x61,5x2 cm
D. Acrylic Plate 70x90x4,5 mm with 3mm hole at bottom and 54 mm between bottom screws
E. Acrylic Plate 69x129,5x6,6 mm with 54 mm between bottom screws

1. Y Motor cable chain. 32 links (part_3) + End link (part_4) + Washer (part_9)
2. Fixed cable channel (part_1) + Top (part_2)
3. https://www.thingiverse.com/thing:2592296 (Anchor)
4. https://www.thingiverse.com/thing:2592249 (Focus Wheel)
5. https://www.thingiverse.com/thing:2592279 (Quick release Plate)
6. 1.75 mm Filament cutouts
7. X Motor Cable Chain: 32-34 links (part_3) + Top link (part_4) + End link (part_5) + Washer (part_9). You have to invert half of the cable chain so it can fold in two directions.
8. Cable chain anchor piece (part_6)
9. Cable chain anchor piece (part-8)
10. Cable chain anchor piece (part_7)
11. https://www.thingiverse.com/thing:2606291 (Support)
12. h