Thingiverse
Electronics
Model downloaden
Lasercut Lixie Display / Clock
81
Downloads
61
Likes
0
Makes
Laser cut 'lixie' four digit display / clock. I saw one of these and wanted to have a go at making one.
Display pieces are made from 3mm acrylic, engraved to approximately 75% depth for the numerals. Body is stacked 3mm ply board, held together with M3 bolts.
The 3mm ply I buy varies in width from 3.1 to 3.4mm so the peg lengths on the display pieces are sized to match the stock I used (you may need to change these sizes if you make it).
The led strip is standard 144 LED/meter WS2812B stuff, and can be driven by pretty much any micro controller. I built on multiple levels to decrease the width and to allow me to use straight lengths of LEDs (reducing the soldering).
1 CAD file contains the acrylic pieces and the other CAD file contains the ply parts.
Made using my modified K40 laser cutter.
Display pieces are made from 3mm acrylic, engraved to approximately 75% depth for the numerals. Body is stacked 3mm ply board, held together with M3 bolts.
The 3mm ply I buy varies in width from 3.1 to 3.4mm so the peg lengths on the display pieces are sized to match the stock I used (you may need to change these sizes if you make it).
The led strip is standard 144 LED/meter WS2812B stuff, and can be driven by pretty much any micro controller. I built on multiple levels to decrease the width and to allow me to use straight lengths of LEDs (reducing the soldering).
1 CAD file contains the acrylic pieces and the other CAD file contains the ply parts.
Made using my modified K40 laser cutter.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
