Thingiverse

Lathe Chuck Spider

by Ken226

11 Downloads

12 Likes

0 Makes

This is a lathe chuck work stop (spider), for chucking very short parts near the chuck jaw tips. It is designed for jaws that are 1" wide, and 1.75 deep. This one is 1.5 high, which allows 1/4" of jaw to engage the part. Print using PLA/ABS/PETG, no supports needed.

It has 3 slightly undersized holes in the bottom to allow you to epoxy/press in 12mm x 6mm neodymium magnets.

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Why?

significant post-processing

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 2/3

Printer

FDM / FFF

File format

STL

Material

PLA, ABS, PETG

Post-processing

Gluing, Hardware

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

Ken226 also publishes on

243 additional models across 1 more platforms

Printables

243 models

♥ 6,081 ↓ 41,469 ⚒ 490

No ratings yet

No comments yet – be the first!

Lathe Chuck Spider

Add to Collection