Lattepanda Active/Passive Cooled Compact Case

I edited the original files so that there's more clearance in the USB ports as the original design wouldn't fit my peripherals with thicker USB and HDMI cables.

I have removed a large chunk of the bottom (square shaped) to accommodate taller heatsinks and if necessary, attach a fan. This large chunk does not exactly fit or hug the heatsink as that will result in an eventual warping of the PLA or PETG plastic due to the heat, hence the extra clearance.

The heatsink in the photo is a 40x40mm one. Bought online for like $2 (make sure you purchase the one where a thermal adhesive is included in the bottom of the heatsink.

I used some spare computer fan screws as feet on the base so that it has enough clearance to radiate the heat.