Launch pad for model rocket

Launch pad for model rockets.
======================
Designed for my modular rocket project [www.thingiverse.com/thing:3583502](https://www.thingiverse.com/thing:3583502) but will work with other Estes or sugar powered rockets which require a guide rod for stability.

It is best printed with the 10 inch (250mm) leg for better stability on rough ground however the 6 3/4 inch (175mm) leg is provided in case the longer legs will not fit diagonally on your printer bed.

* Print 1 x launch pad, 3 x leg and 3 x screw.
* The launch pad and the screws should be printed with a 0.2mm layer height or less in order to ensure that the screw threads are well defined.
* Print the 3 screws together as one job without any other components to ensure good adhesion of the layers.
* The legs may be printed in draft mode with layer height of 0.25mm or higher.

The optional blast deflector plate may be printed in a higher melting point plastic such as ABS so that it will last longer howeve