Thingiverse
LCD Clock Shelf
von Scotty-G
16
Downloads
17
Likes
0
Makes
Wanted to mount a LCD Desktop Clock on the wall so made a shelf.
It sticks to the wall using 3M Command Strips.
Installed 2 M3 Brass Press Fit Inserts (https://www.mcmaster.com/94510a030) into each of the 2 supports.
Attached Shelf to 2 Supports using M3 x 6mm Socket Head Screws - can use 8mm and 10mm as well.
Passed power cord through notch in the back of the self.
Rotate Support to be flat sideways on the bed and print 2 of them.
Supports not needed and used 3 perimeters with 20% infill.
I printed mine out of Clear/Natural PLA.
It sticks to the wall using 3M Command Strips.
Installed 2 M3 Brass Press Fit Inserts (https://www.mcmaster.com/94510a030) into each of the 2 supports.
Attached Shelf to 2 Supports using M3 x 6mm Socket Head Screws - can use 8mm and 10mm as well.
Passed power cord through notch in the back of the self.
Rotate Support to be flat sideways on the bed and print 2 of them.
Supports not needed and used 3 perimeters with 20% infill.
I printed mine out of Clear/Natural PLA.
Scotty-G veröffentlicht auch auf
38 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
