LCD Isolation (auto-clicking fix)

Does your control knob sometimes click by itself for no reason? I suspect there's some interference going not through the ribbon connector, but from the frame. These Things are meant to isolate the LCD panel from the body of the Ender 3.

Just wedge the thin piece of plastic as a sort of spacer between the 40x40 aluminium profile and the LCD frame, then bolt the parts together.

**IMPORTANT** Do not tighten the bolts too much or risk them delaminating and clogging up your threads. Only do so if you're absolutely confident in your material and layer adhesion. If you do end up breaking the bolts, good luck drilling the stuck pieces out. You have been warned!