lead screw cleaner

This is my version of a lead screw cleaner for X1 and P1!After a few attempts, I found that the best method to clean the lead screws is with a dishwashing sponge. Cloths fiber and leave residue that can settle in the lead screw bearing, so this method should not be used.In order to clean the lead screw with the sponge, I created these pliers. In this way, there is a very high probability that, on the one hand, the lead screw will be cleaned very well and, on the other hand, there will be no risk of damage to the bearing. Needed Tools: None! Assembling: The pliers do not need to be assembled because the joint is "print in place". Take a dishwashing sponge and cut two small, matching pieces. Press the sponge pieces into the pockets provided. Using the lead screw cleaner: Move the print bed all the way down. Wet the contact surface of the sponges with a little isopropyl alcohol. Place the pliers on the lead screw and carefully move the print bed upwards step by step, always keepin