Slicer Discord
Lead Screw Cleaner – 3D-printbaar model van MakerWorld MakerWorld
3D Printer Accessories

Lead Screw Cleaner

106 Downloads
45 Likes
43 Makes
Model downloaden
I simply got tired of not being able to clean lead screws properly on my 3D printers without taking them apart for thorough cleaning.I have designed this simple device that uses four 6x3 magnets and isopropyl alcohol-soaked kitchen sponge to thoroughly clean lead screws without ever having to take them apart. This cleaner will hug lead screw and will move on the lead screw by simply moving axis.PrintingPrint 2 copies of the item, both with at least 3 perimeters and 0.2mm layer height.AssemblyGlue in the 6x3 magnets in holes.Cut appropriately sized non-abrasive soft sponge and tuck it inside both slots.UseSoak sponge with Isopropyl Alcohol and connect both pieces around lead screw. Move your axis with 3D printer control panel and keep holding onto the cleaner making sure it doesn't rotate with lead screw.
Categorie
3D Printer Accessories
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
0.20mm lagen
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Laaghoogte
0.2 mm
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

Jal Shah publiceert ook op

24 extra modellen op 1 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie