Leather Splitter

This leather splitter is a work in progress and my first big project. I am a hobbyist and can't guarantee that this will work for you. Fusion file is included so improvements can be made by who ever. Photos are from my first build with what ever I had laying around. Will update soon. Listed hardware should work better.

Hardware Needed

1 M8 x 120 Hex Head Bolts
1 M8 X 20 Flat Head Socket
4 M8 x 40 Hex Head Bolts
2 M5 x 40 Socket Head Bolt
4 M5 x 30 Socket Head Bolt
2 M5 x 20 Socket Head Bolt
4 M8 x 1.25 Nuts
2 M8 x 1.25 Lock Nuts
6 M5 x 0.8 Nuts
12 #8 Washers
4 #5 Washers
4 Phillips head Screws
2 Medium washers with 8mm Inner Diameter
2 608-2rs bearings
2 1.5" heavy springs. The heavier the better.
1 box cutter blade.

I printed everything at 99% infill just for strength purposes. I'm sure you could get away with doing 75% but I wouldn't go any lower than that. IF YOU CHOOSE TO DECREASE INFILL YOU NEED TO INCREASE WALLS. This way the threads wi