lebro james hueforge

Project: lebron lion.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Orange At layer #16 (1.36mm) swap to Yellow At layer #21 (1.76mm) swap to Jade White for the rest.