Lectric Bike PAS Button Cap

This is a replacement button cap for the Lectric brand E-Bikes. They use the same button controls for the PAS (Pedal Assist) and the On/Off for all of their bikes ( I have 4 different models and they are all the same ( XP2.0, XP3.0, XP Lite, and the Premium)
Print this out of Flexible PLA as it needs to flex to push the buttons and it will be too stiff in regular PLA.
My version takes the sides down lower on the controller so you are less apt to catch the cap and rip it off as happened to mine (a ring caught the edge and snapped it off.)
I added some photos of the controller to show you the screws you have to remove (6 total)
They are in there tight so I recommend a good Philips size 0 screwdriver as the heads can easily strip out.
There are 5 screws that hold the case together and one screw in the center once you get it apart that holds the cap to the middle piece.
I made this as Lectric had the part on backorder and would not be able to get it to me for a month.
Let me know i