Thingiverse
Led Arc Lamp
door Niyada
267
Downloads
184
Likes
2
Makes
I saw the Led Bridge Lamp by OPOSSUMS (https://www.thingiverse.com/thing:1639224) and I wanted to print it but it was huge an I simply wanted to make my own... So here it is :)
Information
=========
You'll need 15 Segments and both feet.
Printing time was about 3 hours per segment and 4 hours per foot which makes a total of about 53hours....
The bow has a diameter of about 1 meter.
You can attach 3 LED-strips:
-2 in the inner side (facing towards the desk)
-1 inside the lamp (facing towards the outside) (to illuminate the inside of the lamp and
the surrounding area)
In one of the feet is a hole for a potentiometer, one for a power source and one for the led connectors
Information
=========
You'll need 15 Segments and both feet.
Printing time was about 3 hours per segment and 4 hours per foot which makes a total of about 53hours....
The bow has a diameter of about 1 meter.
You can attach 3 LED-strips:
-2 in the inner side (facing towards the desk)
-1 inside the lamp (facing towards the outside) (to illuminate the inside of the lamp and
the surrounding area)
In one of the feet is a hole for a potentiometer, one for a power source and one for the led connectors
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
