LED Bar for KP3S

LED bar for kingroon kp3s, in this case it is a 5v rgb bar but you could put a different type of led strip I share the link to the led strip used. Its control is done by klipper LED RGB ws2812b IP30 60leds Barra led para la kingroon kp3s, en este caso he utilizado una barra led rgb a 5v. Se podría montar otro tipo de tira led. Os comparto el link de los led que he utilizado. Las tiras led las estoy controlando con klipper LED RGB ws2812b IP30 60leds Other mods for Kingroon KP3s ############### LEDS ######## [neopixel Disco]pin: PB2 #  The pin connected to the neopixel. This parameter must be #   provided.chain_count: 11 #   The number of Neopixel chips that are "daisy chained" to the #   provided pin. The default is 1 (which indicates only a single #   Neopixel is connected to the pin).##color_order: GRB #   Set the pixel order required by the LED hardware. Options are GRB, #   RGB, GRBW, or RGBW. The default is GRB. SET_LED LED=Disco RED=0.093 GREEN=0.051 BLUE=0.093 initial_RED: 0.25 initial_GREEN: 0.25 initial_BLUE: 0.25 #   Sets the initial LED color of the Neopixel. Each value should be #   between 0.0 and 1.0. The WHITE option is only available on RGBW #   LEDs. The default for each color is 0