LED Glasses Frame IS31FL3741

3D print a frame for Adafruit LED Glasses IS31FL3741. Use any Adafruit Feather compatible board to control the LED Glasses. The Feather is secured to the arm with M2.5 x 6mm screws and hex nuts. The two arms are secured to the frame with M2.5 x 14mm long machine screws and hex nuts. The frame is secured to the LED glasses PCB with M3 x 6mm long screws and hex nuts. The Feather connects to the LED glasses using a 50mm STEMMA QT cable.

Adafruit LED Glasses IS31FL3741
https://www.adafruit.com/product/5210

50mm STEMMA QT Cable
https://www.adafruit.com/product/4399

Feather RP2040
https://www.adafruit.com/product/4884

M3 Hardware Kit
https://www.adafruit.com/product/4685

M2.5 Hardware Kit
https://www.adafruit.com/product/3299

USB-C cable
https://www.adafruit.com/product/4696