Slicer Discord
Led Hexagonal Panels – 3D-Druckmodell von MakerWorld MakerWorld
Electronics

Led Hexagonal Panels

874 Downloads
305 Likes
471 Makes
Zum Modell
I took BigJim36's design and modded it to my needs. I've added a tab which not only adds a screw hole to mount it cleanly but adds a way to cable tie to the wires out of the way. I also moved holes to where I need them.I've have added new piece to put the wemos d1 mini I used for the controller. The wemos friction fits on the inside.I used 27 leds per panel (60leds per meter), you can probably fit 28 in each panel but I wanted 11 panels. A 5m strip had 3 leds left over. Using a 5v 20amp power supply which I created a cover for here: https://makerworld.com/de/models/106237and brackets here: https://makerworld.com/en/models/106213 The code I used was from here: https://github.com/NimmLor/esp8266-nanoleaf-webserverThese are very helpful when wiring: https://www.amazon.co.uk/SRunDe-Connector-Controller-Adapter-WS2812B/dp/B08TLZBCLC/LEDs used: https://www.ebay.co.uk/itm/124295445848Power supply used: S-100-5 Arduino: https://www.aliexpress.com/item/32787418018.html?spm=a2g0o.pro
Kategorie
Electronics
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Beerman veröffentlicht auch auf

147 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen