LED Lithophane Lamp

You will need to purchase this LED Lamp from Amazon:
https://www.amazon.com/gp/product/B005HF3ULY/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

You will also need (8) M3x8mm pan head screws.

Supports are not necessary but you might want to add a couple to support the button and power cord holes on the base. I did not purchase the power cord as I just use batteries to power the lamp.

Each picture that you convert to a Lithophane will need to be cropped before conversion.
It must be 110mm X 110mm square.

You can convert photographs to a printable lithophane by uploading it to:
http://3dp.rocks/lithophane/
Here is a great tutorial on how to prepare your photgraphs, convert and then print.
https://www.youtube.com/watch?v=KRdMwuBQQ0U

Be sure to change the settings for each conversion to:
Maximum size = 110mm
Positive Image
Leave the thickness at 3mm.

I used a 2mm border but your preferences may vary.

Once you have the base printed, you will need to disassemble the