LED Lithophane Night Light

LED Lithophane Night Light

Box is 124x84mm (Inner 120x80mm).

Inner Support frame should be printed from translucent filament.

Frame Bracket to be glued to the back of the box.


I found the using a high quality image works best.

The image I used was 1200x800 pixels so it scales down to 120x80mm to fit inside the Box Frame.

Lithophane can be made here

https://tool.itslitho.com/CreateModel

Frame Thickness should be 5mm

And printed from White Filament and printed in "Super Quality"

The LED Strip should be glued (Some LED strips come with self adhesive backing) along the inner wall of the box and can be threaded through the hole on the side of the box.

I found that if you don't have the translucent Inner Frame you can see the the LED's through the image.

I used this LED strip. (0,5m):

https://www.ebay.co.uk/itm/196015194020?var=495880438742

Or you can use a Remote RGB Strip with remote if you want it to chage colours.

https://www.ebay.co.uk/i