Thingiverse
LED logo box
por pietrek_
1
Descargas
1
Likes
0
Makes
Redesigned TeachingTech logo box.
https://www.thingiverse.com/thing:3034821
Components:
- motion triggering (Mini HC-SR505 PIR)
- switch (KCD11 Mini 3A 250V)
- usb-c charging (5V 1A TP4056 USB C)
- based on ATTINY85 micro USB board from Digispark
- 2 x Panasonic NCR18650B 3400mAh rechargeable batteries
- 2 x battery box, rectangular with plates for 18650
- 4 x 6x2mm neodymium magnets
- 4 x short M3 screws
Additionally, you will need a 220x220mm front cover, fixed with magnets.
PET-G, ABS or ASA preffered because of charging temp (you can limit the charging temperature by changing the TP4056 configuration resistor, it will limit the charging current).
https://www.thingiverse.com/thing:3034821
Components:
- motion triggering (Mini HC-SR505 PIR)
- switch (KCD11 Mini 3A 250V)
- usb-c charging (5V 1A TP4056 USB C)
- based on ATTINY85 micro USB board from Digispark
- 2 x Panasonic NCR18650B 3400mAh rechargeable batteries
- 2 x battery box, rectangular with plates for 18650
- 4 x 6x2mm neodymium magnets
- 4 x short M3 screws
Additionally, you will need a 220x220mm front cover, fixed with magnets.
PET-G, ABS or ASA preffered because of charging temp (you can limit the charging temperature by changing the TP4056 configuration resistor, it will limit the charging current).
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
