LED Shop Light Bracket Extension

This is an extension for the brackets of one specific workbench light I am using off Amazon, although it will probably fit other lights as they all look very similar. This is the specific light it fits:https://www.amazon.com/dp/B0CZ3SKJZB?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 NOTE: The pictures show version 1. Version 2 which is posted here I added a top support that adds about 20 minutes to the print time but makes it stronger. These lights are not heavy so there is little concern for the strength. But if you find double wide lights (3 stud spanning 32 inch) you may need the extra support. This bracket provides an extra 240mm of extension from the wall. It raises the height an additional 150mm with the triangular bracket for strength. I provided the STEP sile as well if you wish to remix in fusion and change hole layout or height/length. It's about impossible to get a screw in the very bottom hole, but 3-4 screws in the top 4 holes hold well. Materials used:6mm or ¼ inch (SAE) 12