Thingiverse
LED Strip holder
di Moffrtx
6
Download
1
Likes
0
Makes
This is a LED strip holder for 3528 LED strip (8mm * 2.5mm), ideal for 3D printer enclosure. With this clip you don't need to use the bad 3M adhesive on the strip.
If it's wall-mounted the light will have a 30° inclination, and if it's top-mounted it will be 60°. This two different angle allows you an homogeneous light in your enclosure.
It needs one wood screw per clips, use 3.5x30mm or 3.5x25mm
The clip is 30mm length, print as many as you need to fit your enclosure's dimension. I spaced each clip from each other using a clip as a spacer (so 30mm between each), but you could leave more space if you want to save filament and printing time!
Use PETG, 0.2mm height, 20% infill and 3 perimeters. No support needed, but you need to print it vertically (look at my printer bed picture)
Enjoy!
If it's wall-mounted the light will have a 30° inclination, and if it's top-mounted it will be 60°. This two different angle allows you an homogeneous light in your enclosure.
It needs one wood screw per clips, use 3.5x30mm or 3.5x25mm
The clip is 30mm length, print as many as you need to fit your enclosure's dimension. I spaced each clip from each other using a clip as a spacer (so 30mm between each), but you could leave more space if you want to save filament and printing time!
Use PETG, 0.2mm height, 20% infill and 3 perimeters. No support needed, but you need to print it vertically (look at my printer bed picture)
Enjoy!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!