Thingiverse
LED Striplight
door generalfactotum
5
Downloads
1
Likes
0
Makes
These are my workshop lights. Printed inABS and fixed together with acetone.
Print as many 200mm(+the dovetail) lengths as you want - mine are 1 metre long -and one of each end piece.
To fit to beams, screw 2 of the brackets to suitable beams then stick the unit to the brackets with the acetone using gentle pressure from small g-clamps. Saves measuring !
I used my adhesive tape roller ( can't find the thing number but it was 2 days ago) to stick aluminium tape into the unit as a heatsink and reflector. I couldn't get it on without it creasing but that doesn't matter as you're not trying to focus a beam. Then rolled the LED strip onto the tape. I used hot glue to bed down the ends of the strip for extra support as I soldered the wires onto the ends. you can get connectors but I prefer solder it's more reliable I think. Also I made 20 lights so it was cheaper !
Self adhesive aluminium tape was 75mm wide.
LED strips were 5630 use whatever you want.
Controllers were bought according
Print as many 200mm(+the dovetail) lengths as you want - mine are 1 metre long -and one of each end piece.
To fit to beams, screw 2 of the brackets to suitable beams then stick the unit to the brackets with the acetone using gentle pressure from small g-clamps. Saves measuring !
I used my adhesive tape roller ( can't find the thing number but it was 2 days ago) to stick aluminium tape into the unit as a heatsink and reflector. I couldn't get it on without it creasing but that doesn't matter as you're not trying to focus a beam. Then rolled the LED strip onto the tape. I used hot glue to bed down the ends of the strip for extra support as I soldered the wires onto the ends. you can get connectors but I prefer solder it's more reliable I think. Also I made 20 lights so it was cheaper !
Self adhesive aluminium tape was 75mm wide.
LED strips were 5630 use whatever you want.
Controllers were bought according
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!