LED whoop gate case/holder

This is a case/holder for a DIY LED tinywhoop gate. It's running a WS2812B LED strip controlled by an Arduino board. Due to the design, the case will also hold the gate upright. Nothing else needed. These things are pretty light though. Screwing or gluing them down to something might be a good idea so they won't turn in case the gate gets hit.

###Things you need
* ~120mm PE tube with 12mm inner and 14mm outer diameter
* Wemos D1 mini or an appropiate clone
* WS2812B led strip with 60LEDs/m. I used exactly 1m having 60 LEDs
* 18650 battery
* 18650 battery holder. They're roughly 75x21x18mm (LxWxH)
* 4-6mm M3 screw
* 4mm M3 threaded insert

The price per gate comes down to roughly 15€, considering 1m LED strip being around 6€, D1 Mini clone for 3€ and a single 18650 for 5€. I got 10m of PE tube off of ebay for around 1,50€/m.

###Printing
0.2mm, no supports, PLA.

I printed the whole case without any supports. Printing the straight line for the USB port did work for me.