LedWiz Base

I modeled up this base for my ledwiz. The idea is to attach the ledwiz to this base. Then zip tie down all of the cables coming out of the sides onto this base to help with strain relief and cable organization. And then bolt down the base onto whatever you're building. There should be enough room to stagger the zip ties and have one for each of the 32 cables.

There is room on the other side to fit up to M5 nuts to hold the board down. However, the board itself only has room for up to an M4 screw, so I'd recommend M4x6 or M4x8 screws and M4 nuts to attach the ledwiz to the base