lee case feeder

Small mount to help load a case into a lee progressive press. This model was designed to feed 9mm but it will feed 45acp with no issues. The mounting hole is a .25 inch. I found 2.5 inch by .25 inch bolts for less then a dollar. These worked for both 9mm as well as 45acp. If you plan to use this for rifle cases you may need longer bolts. I haven't tested this design with any rifle cases at the moment. The inlet is .630 inches I plan to attach a .75 inch tube to feed cases into it. You can download my other model that will hold around 10 9mm cases at a time.