LEE LOAD ALL - Moisture Control Lid

## Lee Load All Moisture Control Lid (TM)
This is a moisture control lid I developed for the Lee Load All because I live in a very humid place and needed a way to keep the powder in it nice and dry. The idea is pretty simple, print the two parts and fill the bottom part with your dessicant or silica packs of choice. I use the orange silica in 8mm tied in an old pantyhose. They turn blue when spent and you just pop them in the oven for a bit ( remove them from the pantyhose...) and they are as good as new.

You can still stack the original Lee Load All box or use the original Lee Load All lid if you choose and just print the bottom dessicant container.

### Dessicant
- Silica
- Silica Packs
- Rice?

### Print Settings ( PLA + )
- 0.4 Nozzle
- 0.2 Layer Height
- Wall Count = 2
- Top / Bottom layers = 4
- Supports - Tree supports + auto
- Brim - Optional but if your machine is prone to warping I say do it