Lee Loadmaster Case Feeder Height Spacer

Spacers to set the height of the case feeder - no more fiddling and guessing, just spin one on and mount the case feeder

These are a copy of a set I made from aluminum on my lathe.

The length of the spacers should be correct - if it needs to be tweaked leave a comment and I'll fix any issues

Print out at whatever layer height will reproduce 20 TPI thread profile on your printer with a decent wall thickness and infill to ensure strength. You may need to run a 1/4-20 tap through the threads if they're tight (I did when printing at 0.3mm) or adjust the print.

Yes, that is a custom printed case feeder in the picture. The feed hole is sized to fit 9mm, 380 and 223.