Thingiverse
Legacy Sword
von wiseprints206
27
Downloads
20
Likes
0
Makes
###I started a YouTube channel! Check it out: https://www.youtube.com/@Wiseprints206
This is a recent creation of mine, called the Legacy Sword. It has two blades and a taser that arcs between them. Theoretically, one blade is for sparring others, and the second blade would be for slicing. The build features a built in 18650 in the handle, and a charging port to power the taser and led. If you want to see it work, check out my instagram @wiseprints206!
If you want to build this, the electronics are optional! Just make one without electronics if you don't want to wire it.
#Filament Used:
-grey pla: https://www.amazon.com/gp/product/B07T47BH73?ie=UTF8&tag=wiseprints206-20&camp=1789&linkCode=xm2&creativeASIN=B07T47BH73
-transparent blue pla (https://www.matterhackers.com/store/l/translucent-aqua-pro-series-pla-filament-3.00mm/sk/MSHU6M1Q)
-transparent red pla (https://www.matterhackers.com/store/l/red-translucent-pro-series-pla-filament-3.00mm/sk/M3RYVSA1)
#Tools Needed:
-solder
This is a recent creation of mine, called the Legacy Sword. It has two blades and a taser that arcs between them. Theoretically, one blade is for sparring others, and the second blade would be for slicing. The build features a built in 18650 in the handle, and a charging port to power the taser and led. If you want to see it work, check out my instagram @wiseprints206!
If you want to build this, the electronics are optional! Just make one without electronics if you don't want to wire it.
#Filament Used:
-grey pla: https://www.amazon.com/gp/product/B07T47BH73?ie=UTF8&tag=wiseprints206-20&camp=1789&linkCode=xm2&creativeASIN=B07T47BH73
-transparent blue pla (https://www.matterhackers.com/store/l/translucent-aqua-pro-series-pla-filament-3.00mm/sk/MSHU6M1Q)
-transparent red pla (https://www.matterhackers.com/store/l/red-translucent-pro-series-pla-filament-3.00mm/sk/M3RYVSA1)
#Tools Needed:
-solder
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
