Thingiverse
Robotics
Model downloaden
Lego technic mpu6050 case adapter
11
Downloads
23
Likes
0
Makes
This is a LEGO technic case for the MPU-6050.
With this, you can integrate your gyroscope and accelerometer in your own LEGO build. The MPU-6050 only needs to be pressed in and is then fixed inside the adapter. To get the IMU out of the case, just put a thin rod in the hole underneath.
Dimensions:
5 x 5 x 1 Lego pins
39,9mm x 39,9mm x 7,7mm
There are 4 holes from the top and respectively 3 holes on each side.
The hole openings from underneath are rounded to get better print results.
With this, you can integrate your gyroscope and accelerometer in your own LEGO build. The MPU-6050 only needs to be pressed in and is then fixed inside the adapter. To get the IMU out of the case, just put a thin rod in the hole underneath.
Dimensions:
5 x 5 x 1 Lego pins
39,9mm x 39,9mm x 7,7mm
There are 4 holes from the top and respectively 3 holes on each side.
The hole openings from underneath are rounded to get better print results.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
