Thingiverse
Robotics
Go to Model
Lego technic mpu9250 case adapter
6
Downloads
16
Likes
0
Makes
This is a LEGO technic case for the mpu-9250.
With this, you can integrate your three-axis gyroscope, accelerometer and magnetometer in your own LEGO build. The mpu-9250 only needs to be pressed in and is then fixed inside the adapter. To get the IMU out of the case, just put a thin rod in the hole underneath.
Dimensions:
5 x 5 x 1 Lego pins
39,9mm x 39,9mm x 7,7mm
There are 4 holes from the top and respectively 3 holes on two side.
The hole openings from underneath are rounded to get better print results.
With this, you can integrate your three-axis gyroscope, accelerometer and magnetometer in your own LEGO build. The mpu-9250 only needs to be pressed in and is then fixed inside the adapter. To get the IMU out of the case, just put a thin rod in the hole underneath.
Dimensions:
5 x 5 x 1 Lego pins
39,9mm x 39,9mm x 7,7mm
There are 4 holes from the top and respectively 3 holes on two side.
The hole openings from underneath are rounded to get better print results.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
![ADXL345 X-Axis Mount for Anycubic i3 Mega X-Carriage [MK4] BL-Touch Variant](/imgproxy.php?url=https%3A%2F%2Fresize.thingiverse.com%2F%3Furl%3Dhttps%3A%2F%2Fcdn.thingiverse.com%2Fassets%2Fe2%2F18%2F81%2F83%2Fce%2FADXL345_X-carriage_mount.png%26w%3D1024%26h%3D1024%26fit%3Dcontain%26cbg%3Dwhite&w=400&h=300)
