Length-wise cable stripper

A tool to quickly strip insulation from a significant length of wire. Cutting depth adjustable with a screw. Insert the wire between the cutter and the "cap", grip it firmly, and pull on the wire. One straight cut down the entire length. Works best with thicker wires - the tiny wires like inside the twisted pair are too fiddly and wiggle off the blade.

Requires the base part (what is left after you snap off every disposable segment) of a 18mm snap-off blades, two M3x25 screws (may be longer, one may be shorter, and two m3 nuts. One screw serves as a hinge through the eye of the blade, the other - with the nut pushed to the bottom of the slot - regulates the depth of the cut, pushing the blade up.