Thingiverse
Leonidas (Fully Functional) - Bakugan
36
Download
113
Likes
3
Makes
Summary
Leonidas
Update 2024-01-10: Neo Dragnoid has 2 different spring variations. Left and Right Arm Alt is for the other spring set. Print both if you dont know which spring set you have.
Resin printing is HIGHLY recommended
Finally releasing the fully functioning Leonidas! I used a Neo Dragonoid (Legacy) but make sure to check the springs as only one version of Neo will have the right springs for this. You can easily check by the side flaps on Neo, the springs will have an arm that goes down, that is the one you want to use.
Video: https://www.instagram.com/p/C1c-K_LLn5j/
Manual is still available for those who only want a shelf piece without all the hassle
https://www.thingiverse.com/thing:5833249
Pin hole: 1.6mm
Recommended pin size: 1.4mm-1.5mm
Leonidas
Update 2024-01-10: Neo Dragnoid has 2 different spring variations. Left and Right Arm Alt is for the other spring set. Print both if you dont know which spring set you have.
Resin printing is HIGHLY recommended
Finally releasing the fully functioning Leonidas! I used a Neo Dragonoid (Legacy) but make sure to check the springs as only one version of Neo will have the right springs for this. You can easily check by the side flaps on Neo, the springs will have an arm that goes down, that is the one you want to use.
Video: https://www.instagram.com/p/C1c-K_LLn5j/
Manual is still available for those who only want a shelf piece without all the hassle
https://www.thingiverse.com/thing:5833249
Pin hole: 1.6mm
Recommended pin size: 1.4mm-1.5mm
NoShayminFeeding pubblica anche su
11 modelli aggiuntivi su altre 3 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
