Leopard [fantasy] HueForge

Picture source/author: SandySarten @sandysartenThen used HueForge v0.8.1 to create the model. Important info! Slicing this model takes quite a while, about 3-4 minutes depending on the performance of your PC, so please be patient. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made two version size model/profile, the first is 200x200 and the second for A1Mini 150x150. The color change settings are identical. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.72mm. The Max Depth is 1.9mm and the Actual Depth is 2mm It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used: PLA Elegoo + Black Transmission Distance: 0.3 PLA Sunlu META Grey Transmission Distance: 3.6 PLA BambuLab Basic Orange Transmission Di