Leopard in tree

by Daxjim

13 Downloads

9 Likes

2 Makes

Download Model

leopard black and white monochrome decoration

Project: Leopard.hfp Size 210mmx194mmPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA+ Sunlu Grey Transmission Distance: 2PLA+ Sunlu White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to GreyAt layer #11 (0.96mm) swap