Thingiverse
Robotics
Zum Modell
Lepta v1.0: ROS2 Based Opensource Hexapod Robot
112
Downloads
88
Likes
0
Makes
#Projekt Leptan: Lepta v1.0
3D Printed, ROS2 Based Opensource Hexapod Robot
Codebase under https://gitlab.com/Combinatrix/project-leptan/
Documentation of the robot, including code and everything, can be found under: https://project-leptan-docs.readthedocs.io/en/latest/index.html
Printed without supports!
The Femur is cut in 2 parts, which are connected using small screws or pins of some sort.
The Tibia is the hardest part to print. Brim is required, 0.3 mm layer height produced the most reliable results.
3D Printed, ROS2 Based Opensource Hexapod Robot
Codebase under https://gitlab.com/Combinatrix/project-leptan/
Documentation of the robot, including code and everything, can be found under: https://project-leptan-docs.readthedocs.io/en/latest/index.html
Printed without supports!
The Femur is cut in 2 parts, which are connected using small screws or pins of some sort.
The Tibia is the hardest part to print. Brim is required, 0.3 mm layer height produced the most reliable results.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
