Lerdge Display Case

Housing with Mountingpoints for
Lerdge Display V1.0.2.
(as provided with **Lerdge-X** or **Lerdge-K** 3D Printer-Board).


__VERSION 2 released, adding some inserting Nuts for better screwing
correction (1mm) the position of the encoder hole__

NEW Mount Bracket 2018-12-31

choose one of three front cover shell designs (red, yellow or green)
and the rear cover shell (blue).

without or with fitted rotary encoder.

__A small gap between display surface and the frame is intended__

Also needed:
* 6 pcs. Screws M3 x 10mm or selftapping (fixes the shells and display)
* some washers.
* Version 2 also needed 6 pcs. curled inserting nut M3 x 5 x 5

Optional for Mounting at the side bores:
* 4 pcs. curled inserting nut M3 x 5 x 5
* 4 pcs. Screws M3 (length as needed) .
* maybe some washers.
or:
* 2 pcs. M3 Nuts / T-Slot Nuts with M3 thread for mount directly on the extrusion.
* 2 pcs. Screws M3 (length as needed).
* maybe some washers


You can get the Curled In