Lerdge Filament Sensor Mount

Mounting bracket for Lerdge filament sensor. TH3D sells it as "EZOUT." Pictured is the bracket with the SeeMeCNCEZR extruder like we use on the 300 SUPER+. This should work fine with the stock Crealilty extruder (plastic or metal) as well that comes on the CR-10/CR-10S and Ender series machines.

For the SeeMeCNC EZRstruder, use the file ending in "EZRStruder" and m3x14 bolts (phillips head that come from SeeMeCNC)

For the Stock extruder on Creality machines, use the file ending in "stock extruder" but you'll need 4mm longer bolts for all 4 that hold the stepper motor in.

The sensor is attached with:
2 of M3x20 socket head
2 of M3 nylock nut

For Creality machines, the

**stock extruder hardware**
1 of M3x18 socket head
2 of M3x10 button head
1 of M3x10 counter sunk

**updated lerdge mount**
1 of M3x22 socket head(20 will work in a pinch)
https://www.mcmaster.com/91292a801

2 of M3X14 (12 will work in a pinch)
https://www.mcmaster.com/92095a168

1 of M3x14