Leveling foot - Parametric

Customize the size of your leveling foot with this model! If you are having problems with this model, please leave a comment - I will be happy to help! Note: you print using plastic! It cannot lift a house ;-) I have added the Autodesk Fusion (360) file so you can set the size (height and diameter) of your leveling foot. How to use the file Download the .fsd file and open it in Autodesk Fusion. When in Design mode, click the Modify menu and click Change Parameters Change the Diameter and Height to your likening and the model will change accordingly: Note: The Height parameter is the height without the TPU covers on each end (they are not mandatory). If you want to print them, then your model will be 2 mm heigher. The height is measured when the leveling foot is as small as possible. The wrench is also being exported and has the height of the bolt-head-part of the leveling foot. I recommend that the minimum height is 20 mm. Also the minimum diameter should be 18 mm. If you need a smalle