LG SPT8-SPK stand / riser

🧱 Speaker Stand / Riser – Print & Assembly InstructionsModel: LG SPT8-SPK / LG S65TR soundbar Printer: Creality K1Purpose: Raise speaker above obstructions (sofa, furniture, etc.) to align sound at ear level.⸻🔧 Materials & TemperaturesComponent Material Nozzle Temp Bed Temp Cooling NotesMain Stand PLA 230 °C 55 °C 100 % after layer 2 Easy to print, good surface finish(Optional) Main Stand PETG 245 °C 80 °C 40–50 % Higher heat and impact resistanceFeet TPU 235 °C 55 °C 50 % Flexible, vibration-absorbing⸻⚙️ Print Settings• Layer Height: 0.2 mm• Walls: 3• Top Layers: 4• Bottom Layers: 4• Infill Type: Grid• Infill Density: 15 %• Seam Alignment: Rear or Random• Brim: 4–6 mm (recommended for PETG)• Z-hop: 0.2 mm enabled• Ironing: Optional for smooth top surface⸻🧭 Orientation• Print rear down on the bed.• No supports required unless overhangs > 60°.• Tested on bed size: 220 × 215 mm (K1 with CFS kit).⸻• Optional: place thin foam pad between screw head and speaker base to prevent marks.⸻🦶