Thingiverse
Lid handle for an Elegoo Mars 3
door sploo
2
Downloads
1
Likes
0
Makes
Two handles, scaled appropriately for attaching to the lid of an Elegoo Mars 3 resin printer. They can be attached to the lid using 3M VHB double sided tape; as that doesn't require any holes drilling in the lid.
One has some draft (a slight tapering towards the top) and is likely better (FDM) printed upside down. The version with no tapering can be printed with one side flat on the bed. I've not tried resin printing them.
Two or three walls and 15% infill seems fine in terms of strength, as the lid isn't particularly heavy.
One has some draft (a slight tapering towards the top) and is likely better (FDM) printed upside down. The version with no tapering can be printed with one side flat on the bed. I've not tried resin printing them.
Two or three walls and 15% infill seems fine in terms of strength, as the lid isn't particularly heavy.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
