Light fixture adapter (hanging, sandwich method)

As I removed my old light fixtures from the even older ceiling and tried fitting the new ones, horror got to me: I will never find the required adapters to make it fit nicely, also the ceiling's kind of busted up, too..

As I looked at my trusty Prusa MK2s I realized that with some clever engineering I can make this work.

Whipped out my caliper, the fixtures plate and after some measuring the thing was done, fitted and working perfectly!

**The complete parts list for one fixture adapter:**

* 1x Fixture Hanger
* 1x 100-200mm M5 threaded rod, cut to size
* 3x M5 nuts
* 2x M2.5 x 12mm wood screws
* 2x Fixture spacers for the M2.5 screws
* 1x Adapter Plate
* 1x Fixture cover Disk

**Assemble using this wobbly text instruction list:**

1. Put the nuts in the corresponding slots. **YOU SHOULD GLUE THEM IN IF POSSIBLE!**
2. Screw one nut on the rod, it will tighten up to the adapter plates' nut.
3. Screw and tighten the adapter plate to the nut as flush as possible.