Thingiverse

Light ring for hydroponics 45cm

by sofajesus

24 Downloads

23 Likes

0 Makes

45 cm light ring for hydroponic tower. 2 rows of 9.5 mm LED strips.
Wires hidden in structure.
Prints in 3 identical parts, glue togheter with clear epoxy glue.
Glue the last joint after wiring is done.
Use some hot glue in the holes to prevent water from entering the light ring.
Printed on an Ender 5 plus, no supports.
Probably needs skirt when printing.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Light ring for hydroponics 45cm?

Any FDM printer should handle Light ring for hydroponics 45cm just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Light ring for hydroponics 45cm need supports when printing?

No supports needed for Light ring for hydroponics 45cm — it's designed to print clean off the bed.

What file format is Light ring for hydroponics 45cm available in?

Light ring for hydroponics 45cm is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Light ring for hydroponics 45cm free to download?

Yes, Light ring for hydroponics 45cm is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Light ring for hydroponics 45cm

Similar Models

Add to Collection