Lighthouse - HueForge

Lighthouse - HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm I created two model profiles, 150x150mm and 200x200mm You may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 3.1mm and the Actual Depth is 3.2mm Filaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA+ Sunlu Blue Transmission Distance: 4PLA Sunlu Meta Blue Transmission Distance: 5.7PLA+ Sunlu White Transmission Distance: 5Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to BlueAt layer #15 (1.28mm) swap to BlueAt layer #23 (1.92mm) swap to White for the rest. Thanks!