Thingiverse
Lightswitch HDzero 90 Rigid Camera Mounts
di The_Herder
1
Download
0
Likes
0
Makes
This is a camera mount for HDzero nano 90 cameras for the five33 lightswitch (or other 20mm standoff spacing frames).
Standoff height: 24.5mm (23mm standoff + press insert nut)
20mm = 21.5mm (20mm standoff + press insert)
Standoff spacing 20mm
Camera lens supported and angles:
nano90 = 12mm diameter lens
50 degrees, 55 degrees
nano90v2 = 13mm "upgraded" lens
55 degrees
Printed 100% infill with PA-GF and PA-CF. Not intended for softer TPUs
These were designed to be printed out of rigid plastics like nylons, PPA and so on
Standoff height: 24.5mm (23mm standoff + press insert nut)
20mm = 21.5mm (20mm standoff + press insert)
Standoff spacing 20mm
Camera lens supported and angles:
nano90 = 12mm diameter lens
50 degrees, 55 degrees
nano90v2 = 13mm "upgraded" lens
55 degrees
Printed 100% infill with PA-GF and PA-CF. Not intended for softer TPUs
These were designed to be printed out of rigid plastics like nylons, PPA and so on
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
