lil cheech

Project: lil cheechs.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.3mm and the Actual Depth is 3.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Grey Transmission Distance: 1 PLA Kingroon White Transmission Distance: 0 PLA Kingroon Red Transmission Distance: 4.2 PLA PolyTerra Pastel Peach Transmission Distance: 3.5 PLA Default White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #15 (1.28mm) swap to White At layer #19 (1.6mm) swap to Red At layer #29 (2.4mm) swap to Pastel Peach At layer #33 (2.72mm) swap to White At layer #34 (2.8mm) swap to Yellow for the rest.