Thingiverse

Linear Actuator large

by Brucestephen

97 Downloads

61 Likes

0 Makes

This is an actuator designed for use with a motion simulator. With the 1610 ballscrew @24 volts and the recommended motor this actuator should be capable of unloaded speeds in excess of 900mm per second. It is meant for use with the

Ampflow e30-150 motor http://ampflow.com/three_inch_high_performance_motors.htm

1605/1610 x550 ballscrew https://www.ebay.com/sch/i.html?_odkw=ballscrew+1605&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xballscrew+1605+550.TRS1&_nkw=ballscrew+1605+550&_sacat=0

BK12 bearing https://www.ebay.com/sch/i.html?_odkw=ballscrew+1605+550&_osacat=0&_from=R40&_trksid=p2045573.m570.l1311.R1.TR3.TRC1.A0.H0.Xbk12.TRS0&_nkw=bk12+bf12&_sacat=0

Two pieces of 20x60x500 vslot extruded aluminum from openbuilds http://openbuildspartstore.com/v-slot-20x60-linear-rail/

The linear bearing is from IGUS part #GFL-25 https://www.igus.com/product/?artnr=GFL-25

the shaft coupler is 30x42 with 10mm x 12.7 mm bore

The carrier assembly for use with t

3dprintable arduino Assetto Corsa dirt flight iRacing motion simulator racing simulator Sim racing 3dprintable arduino Assetto Corsa dirt flight iRacing motion simulator racing simulator Sim racing

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format