Linear Strap Friction Lock/Clip

A relatively simple and very small fiction lock/clip. The uploaded files are designed to work with a common strap you can buy for $3 (1" width, approximately 1mm thick) (example strap: https://www.walmart.com/ip/Dritz-1-Grey-Polypro-Strapping-60/174338715). With the top piece/cap removed it can slide fairly easily up and down the strap, but with the cap in place it can hold a surprising amount of weight for its size. I'm unable to tell exactly how much, but I would guess roughly 10lbs of pulling force when working against the teeth.

I would recommend using a filament which has some rigidity but isn't extremely rigid. This was printed using PETG, so the thinner segments have some flexibility but will not immediately fold when pressure is applied. I'm unsure what other filaments could work for this same scenario but you can test them with your own prints.

This piece is not intended to be used on its own. It is meant to be more of a base piece to build other items on top of which